Genome editing, or genome engineering, or gene editing, is a type of genetic engineering in which DNA is inserted, deleted, modified or replaced in the genome of a living organism. Unlike early genetic engineering techniques that randomly inserts genetic material into a host genome, genome editing targets the insertions to site-specific locations. The basic mechanism involved in genetic manipulations through programmable nucleases is the recognition of target genomic loci and binding of effector DNA-binding domain (DBD), double-strand breaks (DSBs) in target DNA by the restriction endonucleases (FokI and Cas), and the repair of DSBs through homology-directed recombination (HDR) or non-homologous end joining (NHEJ).[1][2]
Contents
History
Genome editing was pioneered in the 1990s,[3] before the advent of the common current nuclease-based gene editing platforms but its use was limited by low efficiencies of editing. Genome editing with engineered nucleases, i.e. all three major classes of these enzymes—zinc finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and engineered meganucleases—were selected by Nature Methods as the 2011 Method of the Year.[4] The CRISPR-Cas system was selected by Science as 2015 Breakthrough of the Year.[5]
As of 2015 four families of engineered nucleases were used: meganucleases, zinc finger nucleases (ZFNs), transcription activator-like effector-based nucleases (TALEN), and the clustered regularly interspaced short palindromic repeats (CRISPR/Cas9) system.[6][7][8][9] Nine genome editors were available as of 2017.[10]
In 2018, the common methods for such editing used engineered nucleases, or "molecular scissors". These nucleases create site-specific double-strand breaks (DSBs) at desired locations in the genome. The induced double-strand breaks are repaired through nonhomologous end-joining (NHEJ) or homologous recombination (HR), resulting in targeted mutations ('edits').
In May 2019, lawyers in China reported, in light of the purported creation by Chinese scientist He Jiankui of the first gene-edited humans (see Lulu and Nana controversy), the drafting of regulations that anyone manipulating the human genome by gene-editing techniques, like CRISPR, would be held responsible for any related adverse consequences.[11] A cautionary perspective on the possible blind spots and risks of CRISPR and related biotechnologies has been recently discussed,[12] focusing on the stochastic nature of cellular control processes.
The University of Edinburgh Roslin Institute engineered pigs resistant to a virus that causes porcine reproductive and respiratory syndrome, which costs US and European pig farmers $2.6 billion annually.[13]
In February 2020, a US trial safely showed CRISPR gene editing on 3 cancer patients.[14] In 2020 Sicilian Rouge High GABA, a tomato that makes more of an amino acid said to promote relaxation, was approved for sale in Japan.[13]
In 2021, England (not the rest of the UK) planned to remove restrictions on gene-edited plants and animals, moving from European Union-compliant regulation to rules closer to those of the US and some other countries. An April 2021 European Commission report found "strong indications" that the current regulatory regime was not appropriate for gene editing[13] Later in 2021, researchers announced a CRISPR alternative, labeled obligate mobile element–guided activity (OMEGA) proteins including IscB, IsrB and TnpB as endonucleases found in transposons, and guided by small ωRNAs.[15][16]
Background
Genetic engineering as method of introducing new genetic elements into organisms has been around since the 1970s. One drawback of this technology has been the random nature with which the DNA is inserted into the hosts genome, which can impair or alter other genes within the organism. Although, several methods have been discovered which target the inserted genes to specific sites within an organism genome.[3] It has also enabled the editing of specific sequences within a genome as well as reduced off target effects. This could be used for research purposes, by targeting mutations to specific genes, and in gene therapy. By inserting a functional gene into an organism and targeting it to replace the defective one it could be possible to cure certain genetic diseases.
Gene targeting
Homologous recombination
Early methods to target genes to certain sites within a genome of an organism (called gene targeting) relied on homologous recombination (HR).[17] By creating DNA constructs that contain a template that matches the targeted genome sequence it is possible that the HR processes within the cell will insert the construct at the desired location. Using this method on embryonic stem cells led to the development of transgenic mice with targeted genes knocked out. It has also been possible to knock in genes or alter gene expression patterns.[18] In recognition of their discovery of how homologous recombination can be used to introduce genetic modifications in mice through embryonic stem cells, Mario Capecchi, Martin Evans and Oliver Smithies were awarded the 2007 Nobel Prize for Physiology or Medicine.[19]
Conditional targeting
If a vital gene is knocked out it can prove lethal to the organism. In order to study the function of these genes site specific recombinases (SSR) were used. The two most common types are the Cre-LoxP and Flp-FRT systems. Cre recombinase is an enzyme that removes DNA by homologous recombination between binding sequences known as Lox-P sites. The Flip-FRT system operates in a similar way, with the Flip recombinase recognising FRT sequences. By crossing an organism containing the recombinase sites flanking the gene of interest with an organism that express the SSR under control of tissue specific promoters, it is possible to knock out or switch on genes only in certain cells. These techniques were also used to remove marker genes from transgenic animals. Further modifications of these systems allowed researchers to induce recombination only under certain conditions, allowing genes to be knocked out or expressed at desired times or stages of development.[18]
Process
Double strand break repair
A common form of Genome editing relies on the concept of DNA double stranded break (DSB) repair mechanics. There are two major pathways that repair DSB; non-homologous end joining (NHEJ) and homology directed repair (HDR). NHEJ uses a variety of enzymes to directly join the DNA ends while the more accurate HDR uses a homologous sequence as a template for regeneration of missing DNA sequences at the break point. This can be exploited by creating a vector with the desired genetic elements within a sequence that is homologous to the flanking sequences of a DSB. This will result in the desired change being inserted at the site of the DSB. While HDR based gene editing is similar to the homologous recombination based gene targeting, the rate of recombination is increased by at least three orders of magnitude.[20]
Engineered nucleases
The key to genome editing is creating a DSB at a specific point within the genome. Commonly used restriction enzymes are effective at cutting DNA, but generally recognize and cut at multiple sites. To overcome this challenge and create site-specific DSB, three distinct classes of nucleases have been discovered and bioengineered to date. These are the Zinc finger nucleases (ZFNs), transcription-activator like effector nucleases (TALEN), meganucleases and the clustered regularly interspaced short palindromic repeats (CRISPR/Cas9) system.
Meganucleases
Meganucleases, discovered in the late 1980s, are enzymes in the endonuclease family which are characterized by their capacity to recognize and cut large DNA sequences (from 14 to 40 base pairs).[21] The most widespread and best known meganucleases are the proteins in the LAGLIDADG family, which owe their name to a conserved amino acid sequence.
Meganucleases, found commonly in microbial species, have the unique property of having very long recognition sequences (>14bp) thus making them naturally very specific.[22][23] However, there is virtually no chance of finding the exact meganuclease required to act on a chosen specific DNA sequence. To overcome this challenge, mutagenesis and high throughput screening methods have been used to create meganuclease variants that recognize unique sequences.[23][24] Others have been able to fuse various meganucleases and create hybrid enzymes that recognize a new sequence.[25][26] Yet others have attempted to alter the DNA interacting aminoacids of the meganuclease to design sequence specific meganucelases in a method named rationally designed meganuclease.[27] Another approach involves using computer models to try to predict as accurately as possible the activity of the modified meganucleases and the specificity of the recognized nucleic sequence.[28]
A large bank containing several tens of thousands of protein units has been created. These units can be combined to obtain chimeric meganucleases that recognize the target site, thereby providing research and development tools that meet a wide range of needs (fundamental research, health, agriculture, industry, energy, etc.) These include the industrial-scale production of two meganucleases able to cleave the human XPC gene; mutations in this gene result in Xeroderma pigmentosum, a severe monogenic disorder that predisposes the patients to skin cancer and burns whenever their skin is exposed to UV rays.[29]
Meganucleases have the benefit of causing less toxicity in cells than methods such as Zinc finger nuclease (ZFN), likely because of more stringent DNA sequence recognition;[23] however, the construction of sequence-specific enzymes for all possible sequences is costly and time-consuming, as one is not benefiting from combinatorial possibilities that methods such as ZFNs and TALEN-based fusions utilize.
Zinc finger nucleases
As opposed to meganucleases, the concept behind ZFNs and TALEN technology is based on a non-specific DNA cutting catalytic domain, which can then be linked to specific DNA sequence recognizing peptides such as zinc fingers and transcription activator-like effectors (TALEs).[30] The first step to this was to find an endonuclease whose DNA recognition site and cleaving site were separate from each other, a situation that is not the most common among restriction enzymes.[30] Once this enzyme was found, its cleaving portion could be separated which would be very non-specific as it would have no recognition ability. This portion could then be linked to sequence recognizing peptides that could lead to very high specificity.
Zinc finger motifs occur in several transcription factors. The zinc ion, found in 8% of all human proteins, plays an important role in the organization of their three-dimensional structure. In transcription factors, it is most often located at the protein-DNA interaction sites, where it stabilizes the motif. The C-terminal part of each finger is responsible for the specific recognition of the DNA sequence.
The recognized sequences are short, made up of around 3 base pairs, but by combining 6 to 8 zinc fingers whose recognition sites have been characterized, it is possible to obtain specific proteins for sequences of around 20 base pairs. It is therefore possible to control the expression of a specific gene. It has been demonstrated that this strategy can be used to promote a process of angiogenesis in animals.[31] It is also possible to fuse a protein constructed in this way with the catalytic domain of an endonuclease in order to induce a targeted DNA break, and therefore to use these proteins as genome engineering tools.[32]
The method generally adopted for this involves associating two DNA binding proteins – each containing 3 to 6 specifically chosen zinc fingers – with the catalytic domain of the FokI endonuclease which need to dimerize to cleave the double-strand DNA. The two proteins recognize two DNA sequences that are a few nucleotides apart. Linking the two zinc finger proteins to their respective sequences brings the two FokI domains closer together. FokI requires dimerization to have nuclease activity and this means the specificity increases dramatically as each nuclease partner would recognize a unique DNA sequence. To enhance this effect, FokI nucleases have been engineered that can only function as heterodimers.[33]
Several approaches are used to design specific zinc finger nucleases for the chosen sequences. The most widespread involves combining zinc-finger units with known specificities (modular assembly). Various selection techniques, using bacteria, yeast or mammal cells have been developed to identify the combinations that offer the best specificity and the best cell tolerance. Although the direct genome-wide characterization of zinc finger nuclease activity has not been reported, an assay that measures the total number of double-strand DNA breaks in cells found that only one to two such breaks occur above background in cells treated with zinc finger nucleases with a 24 bp composite recognition site and obligate heterodimer FokI nuclease domains.[33]
The heterodimer functioning nucleases would avoid the possibility of unwanted homodimer activity and thus increase specificity of the DSB. Although the nuclease portions of both ZFNs and TALEN constructs have similar properties, the difference between these engineered nucleases is in their DNA recognition peptide. ZFNs rely on Cys2-His2 zinc fingers and TALEN constructs on TALEs. Both of these DNA recognizing peptide domains have the characteristic that they are naturally found in combinations in their proteins. Cys2-His2 Zinc fingers typically happen in repeats that are 3 bp apart and are found in diverse combinations in a variety of nucleic acid interacting proteins such as transcription factors. Each finger of the Zinc finger domain is completely independent and the binding capacity of one finger is impacted by its neighbor. TALEs on the other hand are found in repeats with a one-to-one recognition ratio between the amino acids and the recognized nucleotide pairs. Because both zinc fingers and TALEs happen in repeated patterns, different combinations can be tried to create a wide variety of sequence specificities.[22] Zinc fingers have been more established in these terms and approaches such as modular assembly (where Zinc fingers correlated with a triplet sequence are attached in a row to cover the required sequence), OPEN (low-stringency selection of peptide domains vs. triplet nucleotides followed by high-stringency selections of peptide combination vs. the final target in bacterial systems), and bacterial one-hybrid screening of zinc finger libraries among other methods have been used to make site specific nucleases.
Zinc finger nucleases are research and development tools that have already been used to modify a range of genomes, in particular by the laboratories in the Zinc Finger Consortium. The US company Sangamo BioSciences uses zinc finger nucleases to carry out research into the genetic engineering of stem cells and the modification of immune cells for therapeutic purposes.[34][35] Modified T lymphocytes are currently undergoing phase I clinical trials to treat a type of brain tumor (glioblastoma) and in the fight against AIDS.[33]
TALEN
Transcription activator-like effector nucleases (TALENs) are specific DNA-binding proteins that feature an array of 33 or 34-amino acid repeats. TALENs are artificial restriction enzymes designed by fusing the DNA cutting domain of a nuclease to TALE domains, which can be tailored to specifically recognize a unique DNA sequence. These fusion proteins serve as readily targetable "DNA scissors" for gene editing applications that enable to perform targeted genome modifications such as sequence insertion, deletion, repair and replacement in living cells.[36] The DNA binding domains, which can be designed to bind any desired DNA sequence, comes from TAL effectors, DNA-binding proteins excreted by plant pathogenic Xanthomanos app. TAL effectors consists of repeated domains, each of which contains a highly conserved sequence of 34 amino acids, and recognize a single DNA nucleotide within the target site. The nuclease can create double strand breaks at the target site that can be repaired by error-prone non-homologous end-joining (NHEJ), resulting in gene disruptions through the introduction of small insertions or deletions. Each repeat is conserved, with the exception of the so-called repeat variable di-residues (RVDs) at amino acid positions 12 and 13. The RVDs determine the DNA sequence to which the TALE will bind. This simple one-to-one correspondence between the TALE repeats and the corresponding DNA sequence makes the process of assembling repeat arrays to recognize novel DNA sequences straightforward. These TALEs can be fused to the catalytic domain from a DNA nuclease, FokI, to generate a transcription activator-like effector nuclease (TALEN). The resultant TALEN constructs combine specificity and activity, effectively generating engineered sequence-specific nucleases that bind and cleave DNA sequences only at pre-selected sites. The TALEN target recognition system is based on an easy-to-predict code. TAL nucleases are specific to their target due in part to the length of their 30+ base pairs binding site. TALEN can be performed within a 6 base pairs range of any single nucleotide in the entire genome.[37]
TALEN constructs are used in a similar way to designed zinc finger nucleases, and have three advantages in targeted mutagenesis: (1) DNA binding specificity is higher, (2) off-target effects are lower, and (3) construction of DNA-binding domains is easier.
CRISPR
CRISPRs (Clustered Regularly Interspaced Short Palindromic Repeats) are genetic elements that bacteria use as a kind of acquired immunity to protect against viruses. They consist of short sequences that originate from viral genomes and have been incorporated into the bacterial genome. Cas (CRISPR associated proteins) process these sequences and cut matching viral DNA sequences. By introducing plasmids containing Cas genes and specifically constructed CRISPRs into eukaryotic cells, the eukaryotic genome can be cut at any desired position.[38]
Editing by nucleobase modification (Base editing)
One of the earliest methods of efficiently editing nucleic acids employs nucleobase modifying enzymes directed by nucleic acid guide sequences was first described in the 1990s and has seen resurgence more recently.[3][39][40][41] This method has the advantage that it does not require breaking the genomic DNA strands, and thus avoids the random insertion and deletions associated with DNA strand breakage. It is only appropriate for precise editing requiring single nucleotide changes and has found to be highly efficient for this type of editing.[41][42]
ARCUT
ARCUT stands for artificial restriction DNA cutter, it is a technique developed by Komiyama. This method uses pseudo-complementary peptide nucleic acid (pcPNA), for identifying cleavage site within the chromosome. Once pcPNA specifies the site, excision is carried out by cerium (CE) and EDTA (chemical mixture), which performs the splicing function.[43]
Precision and efficiency of engineered nucleases
Meganucleases method of gene editing is the least efficient of the methods mentioned above. Due to the nature of its DNA-binding element and the cleaving element, it is limited to recognizing one potential target every 1,000 nucleotides.[9] ZFN was developed to overcome the limitations of meganuclease. The number of possible targets ZFN can recognized was increased to one in every 140 nucleotides.[9] However, both methods are unpredictable because of their DNA-binding elements affecting each other. As a result, high degrees of expertise and lengthy and costly validations processes are required.
TALE nucleases being the most precise and specific method yields a higher efficiency than the previous two methods. It achieves such efficiency because the DNA-binding element consists of an array of TALE subunits, each of them having the capability of recognizing a specific DNA nucleotide chain independent from others, resulting in a higher number of target sites with high precision. New TALE nucleases take about one week and a few hundred dollars to create, with specific expertise in molecular biology and protein engineering.[9]
CRISPR nucleases have a slightly lower precision when compared to the TALE nucleases. This is caused by the need of having a specific nucleotide at one end in order to produce the guide RNA that CRISPR uses to repair the double-strand break it induces. It has been shown to be the quickest and cheapest method, only costing less than two hundred dollars and a few days of time.[9] CRISPR also requires the least amount of expertise in molecular biology as the design lays in the guide RNA instead of the proteins. One major advantage that CRISPR has over the ZFN and TALEN methods is that it can be directed to target different DNA sequences using its ~80nt CRISPR sgRNAs, while both ZFN and TALEN methods required construction and testing of the proteins created for targeting each DNA sequence.[44]
Because off-target activity of an active nuclease would have potentially dangerous consequences at the genetic and organismal levels, the precision of meganucleases, ZFNs, CRISPR, and TALEN-based fusions has been an active area of research. While variable figures have been reported, ZFNs tend to have more cytotoxicity than TALEN methods or RNA-guided nucleases, while TALEN and RNA-guided approaches tend to have the greatest efficiency and fewer off-target effects.[45] Based on the maximum theoretical distance between DNA binding and nuclease activity, TALEN approaches result in the greatest precision.[9]
Multiplex Automated Genomic Engineering (MAGE)
The methods for scientists and researchers wanting to study genomic diversity and all possible associated phenotypes were very slow, expensive, and inefficient. Prior to this new revolution, researchers would have to do single-gene manipulations and tweak the genome one little section at a time, observe the phenotype, and start the process over with a different single-gene manipulation.[46] Therefore, researchers at the Wyss Institute at Harvard University designed the MAGE, a powerful technology that improves the process of in vivo genome editing. It allows for quick and efficient manipulations of a genome, all happening in a machine small enough to put on top of a small kitchen table. Those mutations combine with the variation that naturally occurs during cell mitosis creating billions of cellular mutations.
Chemically combined, synthetic single-stranded DNA (ssDNA) and a pool of oligionucleotides are introduced at targeted areas of the cell thereby creating genetic modifications. The cyclical process involves transformation of ssDNA (by electroporation) followed by outgrowth, during which bacteriophage homologous recombination proteins mediate annealing of ssDNAs to their genomic targets. Experiments targeting selective phenotypic markers are screened and identified by plating the cells on differential medias. Each cycle ultimately takes 2.5 hours to process, with additional time required to grow isogenic cultures and characterize mutations. By iteratively introducing libraries of mutagenic ssDNAs targeting multiple sites, MAGE can generate combinatorial genetic diversity in a cell population. There can be up to 50 genome edits, from single nucleotide base pairs to whole genome or gene networks simultaneously with results in a matter of days.[46]
MAGE experiments can be divided into three classes, characterized by varying degrees of scale and complexity: (i) many target sites, single genetic mutations; (ii) single target site, many genetic mutations; and (iii) many target sites, many genetic mutations.[46] An example of class three was reflected in 2009, where Church and colleagues were able to program Escherichia coli to produce five times the normal amount of lycopene, an antioxidant normally found in tomato seeds and linked to anti-cancer properties. They applied MAGE to optimize the 1-deoxy-D-xylulose 5-phosphate (DXP) metabolic pathway in Escherichia coli to overproduce isoprenoid lycopene. It took them about 3 days and just over $1,000 in materials. The ease, speed, and cost efficiency in which MAGE can alter genomes can transform how industries approach the manufacturing and production of important compounds in the bioengineering, bioenergy, biomedical engineering, synthetic biology, pharmaceutical, agricultural, and chemical industries.
Applications
As of 2012 efficient genome editing had been developed for a wide range of experimental systems ranging from plants to animals, often beyond clinical interest, and was becoming a standard experimental strategy in research labs.[47] The recent generation of rat, zebrafish, maize and tobacco ZFN-mediated mutants and the improvements in TALEN-based approaches testify to the significance of the methods, and the list is expanding rapidly. Genome editing with engineered nucleases will likely contribute to many fields of life sciences from studying gene functions in plants and animals to gene therapy in humans. For instance, the field of synthetic biology which aims to engineer cells and organisms to perform novel functions, is likely to benefit from the ability of engineered nuclease to add or remove genomic elements and therefore create complex systems.[47] In addition, gene functions can be studied using stem cells with engineered nucleases.
Listed below are some specific tasks this method can carry out:
- Targeted gene mutation
- Gene therapy
- Creating chromosome rearrangement
- Study gene function with stem cells
- Transgenic animals
- Endogenous gene labeling
- Targeted transgene addition
Targeted gene modification in animals
The combination of recent discoveries in genetic engineering, particularly gene editing and the latest improvement in bovine reproduction technologies (e.g. in vitro embryo culture) allows for genome editing directly in fertilised oocytes using synthetic highly specific endonucleases. RNA-guided endonucleases:clustered regularly interspaced short palindromic repeats associated Cas9 (CRISPR/Cas9) are a new tool, further increasing the range of methods available. In particular CRISPR/Cas9 engineered endonucleases allows the use of multiple guide RNAs for simultaneous Knockouts (KO) in one step by cytoplasmic direct injection (CDI) on mammalian zygotes.[48]
Furthermore, gene editing can be applied to certain types of fish in aquaculture such as Atlantic salmon. Gene editing in fish is currently experimental, but the possibilities include growth, disease resistance, sterility, controlled reproduction, and colour. Selecting for these traits can allow for a more sustainable environment and better welfare for the fish.[49]
AquAdvantage salmon is a genetically modified Atlantic salmon developed by AquaBounty Technologies. The growth hormone-regulating gene in the Atlantic salmon is replaced with the growth hormone-regulating gene from the Pacific Chinook salmon and a promoter sequence from the ocean pout[50]
Thanks to the parallel development of single-cell transcriptomics, genome editing and new stem cell models we are now entering a scientifically exciting period where functional genetics is no longer restricted to animal models but can be performed directly in human samples. Single-cell gene expression analysis has resolved a transcriptional road-map of human development from which key candidate genes are being identified for functional studies. Using global transcriptomics data to guide experimentation, the CRISPR based genome editing tool has made it feasible to disrupt or remove key genes in order to elucidate function in a human setting.[51]
Targeted gene modification in plants
Genome editing using Meganuclease,[52] ZFNs, and TALEN provides a new strategy for genetic manipulation in plants and are likely to assist in the engineering of desired plant traits by modifying endogenous genes. For instance, site-specific gene addition in major crop species can be used for 'trait stacking' whereby several desired traits are physically linked to ensure their co-segregation during the breeding processes.[33] Progress in such cases have been recently reported in Arabidopsis thaliana[53][54][55] and Zea mays. In Arabidopsis thaliana, using ZFN-assisted gene targeting, two herbicide-resistant genes (tobacco acetolactate synthase SuRA and SuRB) were introduced to SuR loci with as high as 2% transformed cells with mutations.[53] In Zea mays, disruption of the target locus was achieved by ZFN-induced DSBs and the resulting NHEJ. ZFN was also used to drive herbicide-tolerance gene expression cassette (PAT) into the targeted endogenous locus IPK1 in this case.[56] Such genome modification observed in the regenerated plants has been shown to be inheritable and was transmitted to the next generation.[56] A potentially successful example of the application of genome editing techniques in crop improvement can be found in banana, where scientists used CRISPR/Cas9 editing to inactivate the endogenous banana streak virus in the B genome of banana (Musa spp.) to overcome a major challenge in banana breeding.[57]
In addition, TALEN-based genome engineering has been extensively tested and optimized for use in plants.[58] TALEN fusions have also been used by a U.S. food ingredient company, Calyxt,[59] to improve the quality of soybean oil products[60] and to increase the storage potential of potatoes[61]
Several optimizations need to be made in order to improve editing plant genomes using ZFN-mediated targeting.[62] There is a need for reliable design and subsequent test of the nucleases, the absence of toxicity of the nucleases, the appropriate choice of the plant tissue for targeting, the routes of induction of enzyme activity, the lack of off-target mutagenesis, and a reliable detection of mutated cases.[62]
A common delivery method for CRISPR/Cas9 in plants is Agrobacterium-based transformation.[63] T-DNA is introduced directly into the plant genome by a T4SS mechanism. Cas9 and gRNA-based expression cassettes are turned into Ti plasmids, which are transformed in Agrobacterium for plant application.[63] To improve Cas9 delivery in live plants, viruses are being used more effective transgene delivery.[63]
Part of a series of articles on |
Synthetic biology |
---|
Synthetic biological circuits |
Genome editing |
Artificial cells |
Xenobiology |
Other topics |
Research
Gene therapy
The ideal gene therapy practice is that which replaces the defective gene with a normal allele at its natural location. This is advantageous over a virally delivered gene as there is no need to include the full coding sequences and regulatory sequences when only a small proportions of the gene needs to be altered as is often the case.[64][65] The expression of the partially replaced genes is also more consistent with normal cell biology than full genes that are carried by viral vectors.
The first clinical use of TALEN-based genome editing was in the treatment of CD19+ acute lymphoblastic leukemia in an 11-month old child in 2015. Modified donor T cells were engineered to attack the leukemia cells, to be resistant to Alemtuzumab, and to evade detection by the host immune system after introduction.[66][67]
Extensive research has been done in cells and animals using CRISPR-Cas9 to attempt to correct genetic mutations which cause genetic diseases such as Down syndrome, spina bifida, anencephaly, and Turner and Klinefelter syndromes.[68]
In February 2019, medical scientists working with Sangamo Therapeutics, headquartered in Richmond, California, announced the first ever "in body" human gene editing therapy to permanently alter DNA - in a patient with Hunter syndrome.[69] Clinical trials by Sangamo involving gene editing using Zinc Finger Nuclease (ZFN) are ongoing.[70]
Eradicating diseases
Researchers have used CRISPR-Cas9 gene drives to modify genes associated with sterility in A. gambiae, the vector for malaria.[71] This technique has further implications in eradicating other vector borne diseases such as yellow fever, dengue, and Zika.[72]
The CRISPR-Cas9 system can be programmed to modulate the population of any bacterial species by targeting clinical genotypes or epidemiological isolates. It can selectively enable the beneficial bacterial species over the harmful ones by eliminating pathogen, which gives it an advantage over broad-spectrum antibiotics.[46]
Antiviral applications for therapies targeting human viruses such as HIV, herpes, and hepatitis B virus are under research. CRISPR can be used to target the virus or the host to disrupt genes encoding the virus cell-surface receptor proteins.[44] In November 2018, He Jiankui announced that he had edited two human embryos, to attempt to disable the gene for CCR5, which codes for a receptor that HIV uses to enter cells. He said that twin girls, Lulu and Nana, had been born a few weeks earlier. He said that the girls still carried functional copies of CCR5 along with disabled CCR5 (mosaicism) and were still vulnerable to HIV. The work was widely condemned as unethical, dangerous, and premature.[73]
In January 2019, scientists in China reported the creation of five identical cloned gene-edited monkeys, using the same cloning technique that was used with Zhong Zhong and Hua Hua – the first ever cloned monkeys - and Dolly the sheep, and the same gene-editing Crispr-Cas9 technique allegedly used by He Jiankui in creating the first ever gene-modified human babies Lulu and Nana. The monkey clones were made in order to study several medical diseases.[74][75]
Prospects and limitations
In the future, an important goal of research into genome editing with engineered nucleases must be the improvement of the safety and specificity of the nucleases action.[76] For example, improving the ability to detect off-target events can improve our ability to learn about ways of preventing them. In addition, zinc-fingers used in ZFNs are seldom completely specific, and some may cause a toxic reaction. However, the toxicity has been reported to be reduced by modifications done on the cleavage domain of the ZFN.[65]
In addition, research by Dana Carroll into modifying the genome with engineered nucleases has shown the need for better understanding of the basic recombination and repair machinery of DNA. In the future, a possible method to identify secondary targets would be to capture broken ends from cells expressing the ZFNs and to sequence the flanking DNA using high-throughput sequencing.[65]
Because of the ease of use and cost-efficiency of CRISPR, extensive research is currently being done on it. There are now more publications on CRISPR than ZFN and TALEN despite how recent the discovery of CRISPR is.[44] Both CRISPR and TALEN are favored to be the choices to be implemented in large-scale productions due to their precision and efficiency.
Genome editing occurs also as a natural process without artificial genetic engineering. The agents that are competent to edit genetic codes are viruses or subviral RNA-agents.
Although GEEN has higher efficiency than many other methods in reverse genetics, it is still not highly efficient; in many cases less than half of the treated populations obtain the desired changes.[53] For example, when one is planning to use the cell's NHEJ to create a mutation, the cell's HDR systems will also be at work correcting the DSB with lower mutational rates.
Traditionally, mice have been the most common choice for researchers as a host of a disease model. CRISPR can help bridge the gap between this model and human clinical trials by creating transgenic disease models in larger animals such as pigs, dogs, and non-human primates.[77][78] Using the CRISPR-Cas9 system, the programmed Cas9 protein and the sgRNA can be directly introduced into fertilized zygotes to achieve the desired gene modifications when creating transgenic models in rodents. This allows bypassing of the usual cell targeting stage in generating transgenic lines, and as a result, it reduces generation time by 90%.[78]
One potential that CRISPR brings with its effectiveness is the application of xenotransplantation. In previous research trials, CRISPR demonstrated the ability to target and eliminate endogenous retroviruses, which reduces the risk of transmitting diseases and reduces immune barriers.[44] Eliminating these problems improves donor organ function, which brings this application closer to a reality.
In plants, genome editing is seen as a viable solution to the conservation of biodiversity. Gene drive are a potential tool to alter the reproductive rate of invasive species, although there are significant associated risks.[79]
Human enhancement
Many transhumanists see genome editing as a potential tool for human enhancement.[80][81][82] Australian biologist and Professor of Genetics David Andrew Sinclair notes that "the new technologies with genome editing will allow it to be used on individuals (...) to have (...) healthier children" – designer babies.[83] According to a September 2016 report by the Nuffield Council on Bioethics in the future it may be possible to enhance people with genes from other organisms or wholly synthetic genes to for example improve night vision and sense of smell.[84][85] George Church has compiled a list of potential genetic modifications for possibly advantageous traits such as less need for sleep, cognition-related changes that protect against Alzheimer's disease, disease resistances and enhanced learning abilities along with some of the associated studies and potential negative effects.[86][87]
The American National Academy of Sciences and National Academy of Medicine issued a report in February 2017 giving qualified support to human genome editing.[88] They recommended that clinical trials for genome editing might one day be permitted once answers have been found to safety and efficiency problems "but only for serious conditions under stringent oversight."[89]
Risks
In the 2016 Worldwide Threat Assessment of the US Intelligence Community statement United States Director of National Intelligence, James R. Clapper, named genome editing as a potential weapon of mass destruction, stating that genome editing conducted by countries with regulatory or ethical standards "different from Western countries" probably increases the risk of the creation of harmful biological agents or products. According to the statement the broad distribution, low cost, and accelerated pace of development of this technology, its deliberate or unintentional misuse might lead to far-reaching economic and national security implications.[90][91][92] For instance technologies such as CRISPR could be used to make "killer mosquitoes" that cause plagues that wipe out staple crops.[92]
According to a September 2016 report by the Nuffield Council on Bioethics, the simplicity and low cost of tools to edit the genetic code will allow amateurs – or "biohackers" – to perform their own experiments, posing a potential risk from the release of genetically modified bugs. The review also found that the risks and benefits of modifying a person's genome – and having those changes pass on to future generations – are so complex that they demand urgent ethical scrutiny. Such modifications might have unintended consequences which could harm not only the child, but also their future children, as the altered gene would be in their sperm or eggs.[84][85] In 2001 Australian researchers Ronald Jackson and Ian Ramshaw were criticized for publishing a paper in the Journal of Virology that explored the potential control of mice, a major pest in Australia, by infecting them with an altered mousepox virus that would cause infertility as the provided sensitive information could lead to the manufacture of biological weapons by potential bioterrorists who might use the knowledge to create vaccine resistant strains of other pox viruses, such as smallpox, that could affect humans.[85][93] Furthermore, there are additional concerns about the ecological risks of releasing gene drives into wild populations.[85][94][95]
Nobel prize
In 2007, the Nobel Prize for Physiology or Medicine was awarded to Mario Capecchi, Martin Evans and Oliver Smithies "for their discoveries of principles for introducing specific gene modifications in mice by the use of embryonic stem cells."[19]
In 2020, the Nobel Prize in Chemistry was awarded to Emmanuelle Charpentier and Jennifer Doudna for "the development of a method for genome editing".[96]
See also
- CRISPR/Cpf1
- RNA editing
- Epigenome editing
- Prime editing
- Transposons as a genetic tool
- Germinal choice technology
- NgAgo, a ssDNA-guided Argonaute endonuclease
References
- ^ Saurabh S (March 2021). "Genome Editing: Revolutionizing the Crop Improvement". Plant Molecular Biology Reporte. 39 (4): 752–772. doi:10.1007/s11105-021-01286-7. S2CID 233713026.
- ^ Bak, Rasmus O.; Gomez-Ospina, Natalia; Porteus, Matthew H. (August 2018). "Gene Editing on Center Stage". Trends in Genetics. 34 (8): 600–611. doi:10.1016/j.tig.2018.05.004. ISSN 0168-9525. PMID 29908711. S2CID 49269023.
- ^ a b c Woolf TM (April 1998). "Therapeutic repair of mutated nucleic acid sequences". Nature Biotechnology. 16 (4): 341–4. doi:10.1038/nbt0498-341. PMID 9555723. S2CID 9210810.
- ^ "Method of the Year 2011". Nature Methods. 9 (1): 1. January 2012. doi:10.1038/nmeth.1852. PMID 22312634.
- ^ Science News Staff (17 December 2015). "Breakthrough of the Year: CRISPR makes the cut".
- ^ Esvelt KM, Wang HH (2013). "Genome-scale engineering for systems and synthetic biology". Molecular Systems Biology. 9 (1): 641. doi:10.1038/msb.2012.66. PMC 3564264. PMID 23340847.
- ^ Tan WS, Carlson DF, Walton MW, Fahrenkrug SC, Hackett PB (2012). "Precision editing of large animal genomes". Advances in Genetics Volume 80. Vol. 80. pp. 37–97. doi:10.1016/B978-0-12-404742-6.00002-8. ISBN 9780124047426. PMC 3683964. PMID 23084873.
{{cite book}}
:|journal=
ignored (help) - ^ Puchta H, Fauser F (2013). "Gene targeting in plants: 25 years later". The International Journal of Developmental Biology. 57 (6–8): 629–37. doi:10.1387/ijdb.130194hp. PMID 24166445.
- ^ a b c d e f Boglioli E, Richard M. "Rewriting the book of life: a new era in precision genome editing" (PDF). Boston Consulting Group. Retrieved November 30, 2015.
- ^ Church G. "The future of genetic codes and BRAIN codes". YouTube. NIHvcast. Retrieved 10 February 2017.
- ^ Cyranoski D (May 2019). "China set to introduce gene-editing regulation following CRISPR-baby furore". Nature. doi:10.1038/d41586-019-01580-1. PMID 32424191. S2CID 182604140. Retrieved 20 May 2019.
- ^ Cheong KH, Koh JM, Jones MC (July 2019). "Black Swans of CRISPR: Stochasticity and Complexity of Genetic Regulation". BioEssays. 41 (7): e1900032. doi:10.1002/bies.201900032. PMID 31090950. S2CID 155086967.
- ^ a b c Stokstad, Erik (2021-05-26). "U.K. set to loosen rules for gene-edited crops and animals". Science | AAAS. Retrieved 2021-05-27.
- ^ "US Trial Shows 3 Cancer Patients Had Their Genomes Altered Safely by CRISPR". ScienceAlert. 7 February 2020. Retrieved 2020-02-09.
- ^ Altae-Tran, Han; Kannan, Soumya; Demircioglu, F. Esra; Oshiro, Rachel; Nety, Suchita P.; McKay, Luke J.; Dlakić, Mensur; Inskeep, William P.; Makarova, Kira S.; Macrae, Rhiannon K.; Koonin, Eugene V. (2021-10-01). "The widespread IS200/IS605 transposon family encodes diverse programmable RNA-guided endonucleases". Science. 374 (6563): 57–65. Bibcode:2021Sci...374...57A. doi:10.1126/science.abj6856. ISSN 0036-8075. PMC 8929163. PMID 34591643. S2CID 238237947.
- ^ "New programmable gene editing proteins found outside of CRISPR systems". Broad Institute. 2021-09-09. Retrieved 2021-10-04.
- ^ Lodish H, Berk A, Zipursky SL, Matsudaira P, Baltimore D, Darnell J (2000). "Chapter 8.5: Gene Replacement and Transgenic Animals: DNA Is Transferred into Eukaryotic Cells in Various Ways". Molecular Cell Biology (4th ed.). W. H. Freeman and Company. ISBN 978-0-7167-3136-8.
- ^ a b Rocha-Martins M, Cavalheiro GR, Matos-Rodrigues GE, Martins RA (August 2015). "From Gene Targeting to Genome Editing: Transgenic animals applications and beyond". Anais da Academia Brasileira de Ciências. 87 (2 Suppl): 1323–48. doi:10.1590/0001-3765201520140710. PMID 26397828.
- ^ a b "The Nobel Prize in Physiology or Medicine 2007". The Nobel Foundation. Retrieved December 15, 2008.
- ^ Jasin M (June 1996). "Genetic manipulation of genomes with rare-cutting endonucleases". Trends in Genetics. 12 (6): 224–8. doi:10.1016/0168-9525(96)10019-6. PMID 8928227.
- ^ Stoddard BL (February 2005). "Homing endonuclease structure and function". Quarterly Reviews of Biophysics. 38 (1): 49–95. doi:10.1017/s0033583505004063. PMID 16336743. S2CID 27841011.
- ^ a b de Souza N (January 2012). "Primer: genome editing with engineered nucleases". Nature Methods. 9 (1): 27. doi:10.1038/nmeth.1848. PMID 22312638. S2CID 26924628.
- ^ a b c Smith J, Grizot S, Arnould S, Duclert A, Epinat JC, Chames P, et al. (2006). "A combinatorial approach to create artificial homing endonucleases cleaving chosen sequences". Nucleic Acids Research. 34 (22): e149. doi:10.1093/nar/gkl720. PMC 1702487. PMID 17130168.
- ^ Seligman LM, Chisholm KM, Chevalier BS, Chadsey MS, Edwards ST, Savage JH, Veillet AL (September 2002). "Mutations altering the cleavage specificity of a homing endonuclease". Nucleic Acids Research. 30 (17): 3870–9. doi:10.1093/nar/gkf495. PMC 137417. PMID 12202772.
- ^ Chevalier BS, Kortemme T, Chadsey MS, Baker D, Monnat RJ, Stoddard BL (October 2002). "Design, activity, and structure of a highly specific artificial endonuclease". Molecular Cell. 10 (4): 895–905. doi:10.1016/S1097-2765(02)00690-1. PMID 12419232.
- ^ Arnould S, Chames P, Perez C, Lacroix E, Duclert A, Epinat JC, et al. (January 2006). "Engineering of large numbers of highly specific homing endonucleases that induce recombination on novel DNA targets". Journal of Molecular Biology. 355 (3): 443–58. doi:10.1016/j.jmb.2005.10.065. PMID 16310802.
- ^ Rationally-designed meganucleases with altered sequence specificity and DNA-binding affinity, 2006-10-18, retrieved 2018-08-11
- ^ Ashworth J, Taylor GK, Havranek JJ, Quadri SA, Stoddard BL, Baker D (September 2010). "Computational reprogramming of homing endonuclease specificity at multiple adjacent base pairs". Nucleic Acids Research. 38 (16): 5601–8. doi:10.1093/nar/gkq283. PMC 2938204. PMID 20435674.
- ^ Redondo P, Prieto J, Muñoz IG, Alibés A, Stricher F, Serrano L, et al. (November 2008). "Molecular basis of xeroderma pigmentosum group C DNA recognition by engineered meganucleases". Nature. 456 (7218): 107–11. Bibcode:2008Natur.456..107R. doi:10.1038/nature07343. PMID 18987743. S2CID 4300643.
- ^ a b Baker M (January 2012). "Gene-editing nucleases". Nature Methods. 9 (1): 23–6. doi:10.1038/nmeth.1807. PMID 22312637. S2CID 37050234.
- ^ Rebar EJ, Huang Y, Hickey R, Nath AK, Meoli D, Nath S, et al. (December 2002). "Induction of angiogenesis in a mouse model using engineered transcription factors". Nature Medicine. 8 (12): 1427–32. doi:10.1038/nm1202-795. PMID 12415262. S2CID 23318821.
- ^ Kim YG, Cha J, Chandrasegaran S (February 1996). "Hybrid restriction enzymes: zinc finger fusions to Fok I cleavage domain". Proceedings of the National Academy of Sciences of the United States of America. 93 (3): 1156–60. Bibcode:1996PNAS...93.1156K. doi:10.1073/pnas.93.3.1156. PMC 40048. PMID 8577732.
- ^ a b c d Urnov FD, Rebar EJ, Holmes MC, Zhang HS, Gregory PD (September 2010). "Genome editing with engineered zinc finger nucleases". Nature Reviews. Genetics. 11 (9): 636–46. doi:10.1038/nrg2842. PMID 20717154. S2CID 205484701.
- ^ Reik A, et al. (2008). "Zinc finger nucleases targeting the glucocorticoid receptor allow IL-13 zetakine transgenic CTLs to kill glioblastoma cells in vivo in the presence of immunosuppressing glucocorticoids". Mol. Ther. 16 (Supplement 1): S13–S14. doi:10.1016/S1525-0016(16)39437-0.
- ^ Holt N, Wang J, Kim K, Friedman G, Wang X, Taupin V, et al. (August 2010). "Human hematopoietic stem/progenitor cells modified by zinc-finger nucleases targeted to CCR5 control HIV-1 in vivo". Nature Biotechnology. 28 (8): 839–47. doi:10.1038/nbt.1663. PMC 3080757. PMID 20601939.
- ^ Gaj T, Gersbach CA, Barbas CF (July 2013). "ZFN, TALEN, and CRISPR/Cas-based methods for genome engineering". Trends in Biotechnology. 31 (7): 397–405. doi:10.1016/j.tibtech.2013.04.004. PMC 3694601. PMID 23664777.
- ^ Pérez-Quintero AL, Rodriguez-R LM, Dereeper A, López C, Koebnik R, Szurek B, Cunnac S (2013-07-15). "An improved method for TAL effectors DNA-binding sites prediction reveals functional convergence in TAL repertoires of Xanthomonas oryzae strains". PLOS ONE. 8 (7): e68464. Bibcode:2013PLoSO...868464P. doi:10.1371/journal.pone.0068464. PMC 3711819. PMID 23869221.
- ^ Young S (11 February 2014). "Genome Surgery". MIT Technology Review.
- ^ Woolf TM, Chase JM, Stinchcomb DT (August 1995). "Toward the therapeutic editing of mutated RNA sequences". Proceedings of the National Academy of Sciences of the United States of America. 92 (18): 8298–302. Bibcode:1995PNAS...92.8298W. doi:10.1073/pnas.92.18.8298. PMC 41144. PMID 7545300.
- ^ Woolf TM, Gurumurthy CB, Boyce F, Kmiec EB (April 2017). "To cleave or not to cleave: therapeutic gene editing with and without programmable nucleases". Nature Reviews. Drug Discovery. 16 (4): 296. doi:10.1038/nrd.2017.42. PMID 28303022.
- ^ a b Komor AC, Kim YB, Packer MS, Zuris JA, Liu DR (May 2016). "Programmable editing of a target base in genomic DNA without double-stranded DNA cleavage". Nature. 533 (7603): 420–4. Bibcode:2016Natur.533..420K. doi:10.1038/nature17946. PMC 4873371. PMID 27096365.SharedIt
- ^ Cervantes-Gracia K, Gramalla-Schmitz A, Weischedel J, Chahwan R (2021). "APOBECs orchestrate genomic and epigenomic editing across health and disease". Trends Genet. 37 (11): 1028–1043. doi:10.1016/j.tig.2021.07.003. ISSN 0168-9525. PMID 34353635. S2CID 236934922.
- ^ Khan, Sikandar Hayat (2019-06-07). "Genome-Editing Technologies: Concept, Pros, and Cons of Various Genome-Editing Techniques and Bioethical Concerns for Clinical Application". Molecular Therapy. Nucleic Acids. Elsevier BV. 16: 326–334. doi:10.1016/j.omtn.2019.02.027. ISSN 2162-2531. PMC 6454098. PMID 30965277.
- ^ a b c d Barrangou R, Doudna JA (September 2016). "Applications of CRISPR technologies in research and beyond". Nature Biotechnology. 34 (9): 933–941. doi:10.1038/nbt.3659. PMID 27606440. S2CID 21543486.
- ^ Kim H, Kim JS (May 2014). "A guide to genome engineering with programmable nucleases". Nature Reviews. Genetics. 15 (5): 321–34. doi:10.1038/nrg3686. PMID 24690881. S2CID 9373606.
- ^ a b c d Gallagher RR, Li Z, Lewis AO, Isaacs FJ (October 2014). "Rapid editing and evolution of bacterial genomes using libraries of synthetic DNA". Nature Protocols. 9 (10): 2301–16. doi:10.1038/nprot.2014.082. PMID 25188632. S2CID 16447825.
- ^ a b McMahon MA, Rahdar M, Porteus M (December 2011). "Gene editing: not just for translation anymore". Nature Methods. 9 (1): 28–31. doi:10.1038/nmeth.1811. PMID 22205513. S2CID 2144013.
- ^ Daigneault BW, Rajput S, Smith GW, Ross PJ (May 2018). "Embryonic POU5F1 is Required for Expanded Bovine Blastocyst Formation". Scientific Reports. 8 (1): 7753. Bibcode:2018NatSR...8.7753D. doi:10.1038/s41598-018-25964-x. PMC 5958112. PMID 29773834.
- ^ Wargelius, Anna (2019). "Application of genome editing in aquatic farm animals". Transgenic Research. 28 (Suppl 2): 101–105. doi:10.1007/s11248-019-00163-0. PMID 31321691. S2CID 197665984. Retrieved 29 April 2021.
- ^ Yaskowiak, Edward S.; Shears, Margaret A.; Agarwal-Mawal, Alka; Fletcher, Garth L. (2006). "Characterization and multi-generational stability of the growth hormone transgene (EO-1α) responsible for enhanced growth rates in Atlantic Salmon". Transgenic Research. 15 (4): 465–480. doi:10.1007/s11248-006-0020-5. PMID 16906447. S2CID 22247493.
- ^ Ortega NM, Winblad N, Plaza Reyes A, Lanner F (October 2018). "Functional genetics of early human development". Current Opinion in Genetics & Development. 52: 1–6. doi:10.1016/j.gde.2018.04.005. PMID 29729430.
- ^ Arnould S, Delenda C, Grizot S, Desseaux C, Pâques F, Silva GH, Smith J (January 2011). "The I-CreI meganuclease and its engineered derivatives: applications from cell modification to gene therapy". Protein Engineering, Design & Selection. 24 (1–2): 27–31. doi:10.1093/protein/gzq083. PMID 21047873.
- ^ a b c Townsend JA, Wright DA, Winfrey RJ, Fu F, Maeder ML, Joung JK, Voytas DF (May 2009). "High-frequency modification of plant genes using engineered zinc-finger nucleases". Nature. 459 (7245): 442–5. Bibcode:2009Natur.459..442T. doi:10.1038/nature07845. PMC 2743854. PMID 19404258.
- ^ Zhang F, Maeder ML, Unger-Wallace E, Hoshaw JP, Reyon D, Christian M, et al. (June 2010). "High frequency targeted mutagenesis in Arabidopsis thaliana using zinc finger nucleases". Proceedings of the National Academy of Sciences of the United States of America. 107 (26): 12028–33. Bibcode:2010PNAS..10712028Z. doi:10.1073/pnas.0914991107. PMC 2900673. PMID 20508152.
- ^ Osakabe K, Osakabe Y, Toki S (June 2010). "Site-directed mutagenesis in Arabidopsis using custom-designed zinc finger nucleases". Proceedings of the National Academy of Sciences of the United States of America. 107 (26): 12034–9. Bibcode:2010PNAS..10712034O. doi:10.1073/pnas.1000234107. PMC 2900650. PMID 20508151.
- ^ a b Shukla VK, Doyon Y, Miller JC, DeKelver RC, Moehle EA, Worden SE, et al. (May 2009). "Precise genome modification in the crop species Zea mays using zinc-finger nucleases". Nature. 459 (7245): 437–41. Bibcode:2009Natur.459..437S. doi:10.1038/nature07992. PMID 19404259. S2CID 4323298.
- ^ Tripathi JN, Ntui VO, Ron M, Muiruri SK, Britt A, Tripathi L (2019-01-31). "CRISPR/Cas9 editing of endogenous banana streak virus in the B genome of Musa spp. overcomes a major challenge in banana breeding". Communications Biology. 2 (1): 46. doi:10.1038/s42003-019-0288-7. PMC 6355771. PMID 30729184.
- ^ Townson J (2017-01-01). "Recent developments in genome editing for potential use in plants". Bioscience Horizons. 10. doi:10.1093/biohorizons/hzx016.
- ^ Regalado A (19 December 2017). "These Are Not Your Father's GMOs". MIT Technology Review. Retrieved 16 April 2018.
- ^ Haun W, Coffman A, Clasen BM, Demorest ZL, Lowy A, Ray E, et al. (September 2014). "Improved soybean oil quality by targeted mutagenesis of the fatty acid desaturase 2 gene family". Plant Biotechnology Journal. 12 (7): 934–40. doi:10.1111/pbi.12201. PMID 24851712.
- ^ Clasen BM, Stoddard TJ, Luo S, Demorest ZL, Li J, Cedrone F, et al. (January 2016). "Improving cold storage and processing traits in potato through targeted gene knockout". Plant Biotechnology Journal. 14 (1): 169–76. doi:10.1111/pbi.12370. PMID 25846201.
- ^ a b Puchta H, Hohn B (June 2010). "Breaking news: plants mutate right on target". Proceedings of the National Academy of Sciences of the United States of America. 107 (26): 11657–8. Bibcode:2010PNAS..10711657P. doi:10.1073/pnas.1006364107. PMC 2900667. PMID 20554917.
- ^ a b c Paul JW, Qi Y (July 2016). "CRISPR/Cas9 for plant genome editing: accomplishments, problems and prospects". Plant Cell Reports. 35 (7): 1417–27. doi:10.1007/s00299-016-1985-z. PMID 27114166. S2CID 8035222.
- ^ Monga, Isha; Qureshi, Abid; Thakur, Nishant; Gupta, Amit Kumar; Kumar, Manoj (September 2017). "ASPsiRNA: A Resource of ASP-siRNAs Having Therapeutic Potential for Human Genetic Disorders and Algorithm for Prediction of Their Inhibitory Efficacy". G3. 7 (9): 2931–2943. doi:10.1534/g3.117.044024. PMC 5592921. PMID 28696921.
- ^ a b c Carroll D (November 2008). "Progress and prospects: zinc-finger nucleases as gene therapy agents". Gene Therapy. 15 (22): 1463–8. doi:10.1038/gt.2008.145. PMC 2747807. PMID 18784746.
- ^ Pollack A (2015-11-05). "A Cell Therapy Untested in Humans Saves a Baby With Cancer". The New York Times. ISSN 0362-4331. Retrieved 2015-11-30.
- ^ Couzin-Frankel J (November 2015). "CANCER IMMUNOTHERAPY. Baby's leukemia recedes after novel cell therapy". Science. 350 (6262): 731. doi:10.1126/science.350.6262.731. PMID 26564829.
- ^ Mentis AF (December 2016). "Epigenomic engineering for Down syndrome". Neuroscience and Biobehavioral Reviews. 71: 323–327. doi:10.1016/j.neubiorev.2016.09.012. PMID 27646312. S2CID 24192441.
- ^ Marchione M (7 February 2019). "Tests suggest scientists achieved 1st 'in body' gene editing". AP News. Retrieved 7 February 2019.
- ^ Staff (2 February 2019). "Ascending Dose Study of Genome Editing by the Zinc Finger Nuclease (ZFN) Therapeutic SB-913 in Subjects With MPS II". ClinicalTrials.gov. U.S. National Library of Medicine. Retrieved 7 February 2019.
- ^ Hammond A, Galizi R, Kyrou K, Simoni A, Siniscalchi C, Katsanos D, et al. (January 2016). "A CRISPR-Cas9 gene drive system targeting female reproduction in the malaria mosquito vector Anopheles gambiae". Nature Biotechnology. 34 (1): 78–83. doi:10.1038/nbt.3439. PMC 4913862. PMID 26641531.
- ^ Fletcher M (2018-08-11). "Mutant mosquitoes: Can gene editing kill off malaria?". The Telegraph. ISSN 0307-1235. Retrieved 2018-08-12.
- ^ Begley S (28 November 2018). "Amid uproar, Chinese scientist defends creating gene-edited babies - STAT". STAT.
- ^ Science China Press (23 January 2019). "Gene-edited disease monkeys cloned in China". EurekAlert!. Retrieved 24 January 2019.
- ^ Mandelbaum RF (23 January 2019). "China's Latest Cloned-Monkey Experiment Is an Ethical Mess". Gizmodo. Retrieved 24 January 2019.
- ^ Teboul L, Herault Y, Wells S, Qasim W, Pavlovic G (June 2020). "Variability in Genome Editing Outcomes: Challenges for Research Reproducibility and Clinical Safety". Molecular Therapy. 28 (6): 1422–1431. doi:10.1016/j.ymthe.2020.03.015. PMC 7264426. PMID 32243835.
- ^ Im W, Moon J, Kim M (September 2016). "Applications of CRISPR/Cas9 for Gene Editing in Hereditary Movement Disorders". Journal of Movement Disorders. 9 (3): 136–43. doi:10.14802/jmd.16029. PMC 5035944. PMID 27667185.
- ^ a b Hsu PD, Lander ES, Zhang F (June 2014). "Development and applications of CRISPR-Cas9 for genome engineering". Cell. 157 (6): 1262–1278. doi:10.1016/j.cell.2014.05.010. PMC 4343198. PMID 24906146.
- ^ Johnson JA, Altwegg R, Evans DM, Ewen JG, Gordon IJ, Pettorelli N, Young JK (2016-04-01). "Is there a future for genome-editing technologies in conservation?". Animal Conservation. 19 (2): 97–101. doi:10.1111/acv.12273. ISSN 1469-1795. S2CID 27633404.
- ^ Pearlman A (2015-12-03). "Geneticists Are Concerned Transhumanists Will Use CRISPR on Themselves". Vice Motherboard. Retrieved 26 December 2016.
- ^ Jorgensen E. "How DIY bio-hackers are changing the conversation around genetic engineering". The Washington Post. Retrieved 26 December 2016.
- ^ "Human Enhancement". Pew Research Center. 2016-07-26. Retrieved 26 December 2016.
- ^ Regalado A. "Engineering the Perfect Baby". MIT Technology Review. Retrieved 26 December 2016.
- ^ a b Sample I (30 September 2016). "Experts warn home 'gene editing' kits pose risk to society". The Guardian. Retrieved 26 December 2016.
- ^ a b c d "Genome editing: an ethical review" (PDF). Nuffield Council on Bioethics. September 2016. Retrieved 27 December 2016.
- ^ "George Church told us why he's listing "superhuman" gene hacks". Futurism. Retrieved 25 July 2021.
- ^ "Protective alleles". arep.med.harvard.edu. Retrieved 25 July 2021.
- ^ Harmon A (2017-02-14). "Human Gene Editing Receives Science Panel's Support". The New York Times. ISSN 0362-4331. Retrieved 2017-02-17.
- ^ "Scientists OK genetically engineering babies". New York Post. Reuters. 2017-02-14. Retrieved 2017-02-17.
- ^ Clapper JR (9 February 2016). "Worldwide Threat Assessment of the US Intelligence Community" (PDF). Retrieved 26 December 2016.
- ^ Warmflash D (2016-09-06). "Genome editing: Is it a national security threat?". Retrieved 26 December 2016.
- ^ a b Regalado A. "Top U.S. Intelligence Official Calls Gene Editing a WMD Threat". MIT Technology Review. Retrieved 26 December 2016.
- ^ Jackson R, Ramshaw I (January 2010). "The mousepox experience. An interview with Ronald Jackson and Ian Ramshaw on dual-use research. Interview by Michael J. Selgelid and Lorna Weir". EMBO Reports. 11 (1): 18–24. doi:10.1038/embor.2009.270. PMC 2816623. PMID 20010799.
- ^ Broad WJ (23 January 2001). "Australians Create a Deadly Mouse Virus". The New York Times. Retrieved 27 December 2016.
- ^ Radford T (10 January 2001). "Lab creates killer virus by accident". The Guardian. Retrieved 27 December 2016.
- ^ "The Nobel Prize in Chemistry 2020". Nobel Foundation. Archived from the original on 7 October 2020. Retrieved 7 October 2020.
"WHO launches global registry on human genome editing." PharmaBiz, 31 Aug. 2019. Gale General OneFile, Accessed 27 Apr. 2020.
Further reading
- Saurabh S (March 2021). "Genome Editing: Revolutionizing the Crop Improvement". Plant Molecular Biology Reporte. 39 (4): 752–772. doi:10.1007/s11105-021-01286-7. S2CID 233713026.
- "Special Issue on Human Germline Editing". Bioethics. 34. 2020.
- "Customized Human Genes: New Promises and Perils". Scientific American. Retrieved 2019-02-21.
- Connor S (25 April 2014). "Scientific split - the human genome breakthrough dividing former colleagues". The Independent. Retrieved 2016-02-11.
- "What is genome editing?". yourgenome.org. Retrieved 2018-04-13.